Micronet is Ericsson's new fiber optic micro cable system specially developed for metropolitan and access network installations, where scalability, flexibility, and cost-effective installations are of key importance.
Micronet is a complement to the established Ribbonet® system and developed to effectively link trunk networks to access networks.
Micronetconsists of micro cables with from 4 up to 72 fibers, and micro-ducts in which the micro cables are installed. Both cables and ducts are installed with air blown technology.
Benefits
:: Small size with high fiber counts.
:: Fast and convenient installation technique.
:: Incremental installation, efficient capital investment.
-------------------------------------------------------------------------------
SMALL SIZE, HIGH FIBER COUNT
Micronet Cables
Micro cable (GAHLDV) is a fiber optic micro cable for duct installation and is the major building block in Ericsson's Micronet system.
The micro cable consists of six compact fiber units (CFU) with either 4 or 12 fibers per unit. This enables a fiber count from 4 to 72 fibers.
The versatility of this cable design has enabled a very compact and small fiber cable that can be installed in pipes with an inner diameter of 5.5 or 8mm.
Benefits
:: Excellent installation performance
:: Easy to strip and identify fibers
:: Very good temperature performance
:: Diameter from 4.0 mm
:: Robust and flexible design -
-------------------------------------------------------------------------------
Micronet Ducts
Micronet microducts and multiducts are used for air blown installation of micro cables. The micro/multiducts are deployed in existing ducts, or directly in the ground. The ducts are installed with air blown technology or by pulling.
The ducts can be installed separately and in advance, in new or existing channels. Installation of micro cable may then be incremental, adapted to growth of end-user or bandwidth demands.
Duct branch closure for Micronet multiducts Branching and jointing kit intended for branching of Micronet multiducts and microducts.
The closure can also be used as a protective cover for straight joints.
The closure has 4 duct ports
Benefits
• indoor and outdoor designs
• low-friction for long distance air-blown installation
|
